In this study, Influence of plastic aggregate and curing condition on the mechanical properties of concrete containing silica fume has been investigated. Concretes included silica fume (SF) as a cement replacement levels of 10% and 15% and contain plastic waste aggregate (PWA) as a natural aggregate (NA) replacement. In this study plastic fine aggregate (PF) and plastic coarse aggregate (PC) are replaced at NA. The w/b ratio and total cementitious materials content were kept constant for all mixes at 0.50 and 350 kg/m3 respectively. Concrete mixes were evaluated for compressive and tensile strengths at 7, 28 and 90 days in two different environment: a) laboratory environment (LE) and b) out (Marine) environment (ME/OE). The results show that Concretes containing silica fume compressive strength decreases with increasing of PWA as a replacement and outdoor condition is more important for surveying curing position.
صفای نیکو, حامد, & شهرآبادی, حمید. (1394). Influence of Plastic Aggregate and Curing Condition on the Mechanical Properties of Concrete Containing Silica Fume in Marine Environments. کشتیرانی و فناوری دریایی, 3(1), 77-88.
MLA
حامد صفای نیکو; حمید شهرآبادی. "Influence of Plastic Aggregate and Curing Condition on the Mechanical Properties of Concrete Containing Silica Fume in Marine Environments". کشتیرانی و فناوری دریایی, 3, 1, 1394, 77-88.
HARVARD
صفای نیکو, حامد, شهرآبادی, حمید. (1394). 'Influence of Plastic Aggregate and Curing Condition on the Mechanical Properties of Concrete Containing Silica Fume in Marine Environments', کشتیرانی و فناوری دریایی, 3(1), pp. 77-88.
VANCOUVER
صفای نیکو, حامد, شهرآبادی, حمید. Influence of Plastic Aggregate and Curing Condition on the Mechanical Properties of Concrete Containing Silica Fume in Marine Environments. کشتیرانی و فناوری دریایی, 1394; 3(1): 77-88.
)